Search

Fulltext results:

pile-up_effect

10 Hits, Last modified: 10 years ago

{{tag> TCSPC pile-up dead_time}} ~~TOC~~ ====== Pile-Up Effect ====== The Pile-Up effect describes the effects of photons lost at high photon count rates due... etect only one photon after one laser shot. "Pile up" describes the effects of photons lost at hight p

t3-mode

5 Hits, Last modified: 10 years ago

. The main objective is to allow high sync rates (up to 84 MHz) which could not be handled in T2 Mode.... nted by four bits in each TTTR record, that allow up to four routing channels to be distinguished. How... er record is inserted in the data stream, so that upon processing of the data stream a theoretically i... ]] (First In First Out) buffer capable of holding up to 256 k event records. The FIFO input is fast en

t2-mode

3 Hits, Last modified: 10 years ago

er record is inserted in the data stream, so that upon processing of the data stream a theoretically i... ]] (First In First Out) buffer capable of holding up to 256 k event records. The FIFO input is fast en... the full speed of the time-to-digital converters (up to 10 Mcps each). This means, even during a fast

differential_count_rate

2 Hits, Last modified: 8 years ago

{{tag> pile-up dead_time IRF differential_countrate}} ====== Differential Count Rate ====== Ideally,... various counting losses.(E.g. to avoid the [[pile-up effect]]). However, for an IRF measurement the sa

dead_time

1 Hits, Last modified: 10 years ago

lost. This leads to the so called [[glossary:Pile-up Effect]]. Note that not only TCSPC devices but a