ved.
Such a cocktail cannot be stored for a long time. Latest the KI will photochemically decompose.
=... of course) any of the above mentioned fast decay time fluorophores and record their response. The signa... surement series, provided that the system has had time to warm up (~15min), and neither the repetition r... used as for the sample), and re-used later. Over time or upon changes of the excitation wavelength, the
etch from minimum to maximum. As the mean arrival time of the background photons in the areas where no f... ad over the TCSPC window, the mean photon arrival time of the dark background is usually very long (up t... lifetime corresponds to the real average arrival time of the photons and is therefore also close to the... etch from minimum to maximum. As the mean arrival time of the background photons in the areas where no f
etch from minimum to maximum. As the mean arrival time of the background photons in the areas where no f... ad over the TCSPC window, the mean photon arrival time of the dark background is usually very long (with... pulse does not shift within the image acquisition time within the TCSPC window, therefore we fix the par... e "Fast Lifetime", which is just the mean arrival time and contains e.g. background photons.\\
* An up
0 MHz. Note the peak near the expected dip at lag-time=0 due to SPAD afterglow. Compared with figure 1 t... )
*//Delta// is the step width of the lag-time axis in units of the [[Products:PicoHarp 300]] Re... -Axis of the correlation.
*Start with lag-time/200/T2-resolution (e.g. 700ns/200/32ps ~=110; thi