Differences

This shows you the differences between two versions of the page.

--- support:tcspc_external_markers [2019/01/08 12:57] – [Step 3: Make the connection] sisamakis
+++ support:tcspc_external_markers [2019/01/08 13:04] – [Step 3: Make the connection] sisamakis
@@ Line 21: / Line 21: @@
   * PicoHarp manual:  Check  pages 34-35 and 67-68 .  (For the combined use with a PHR800 router also take a look at the PHR800 manual for additional options regarding connectors)
   * HydraHarp manual:  Check  pages 32-33 and 67.
-  * TimeHarp manual:  Check  pages 34-35 and 69 . \\
+  * TimeHarp manual:  Check  pages 34-35 and 69.
+  * MultiHarp manual: Check pages 33-34, 57    and 69-71. \\
 ====Step 3: Make the connection====
@@ Line 27: / Line 28: @@
 Probably this mean that you have to construct a cable your self.
 Please note that PicoQuant has the proper cables for \\
-PI Controller: E725 \\
+  * PicoQuant FlimBee Galvo Scanner
-PI Controller: E710 \\
+  * PI Controller: E725
+  * PI Controller: E710 \\
 which have been used in PicoQuant systems before  [[http://tcspc.com/doku.php/software:supported_mt200_pc_configuration_for_symphotime_64|and also MadCity labs can help you getting the proper cable for their stages. ]]