me image with systems equipped with a fast Galvo scanner. The image containing many frames is treated here... r active in the SymPhoTime. When measuring with a scanner controlled by SymPhoTime, e.g. a MicroTime system... the image size is automatically adapted. If your scanner is not controlled via the SymPhoTime, and no hand
o the SymPhoTIme Manual page 6 under "Setting LSM scanner configuration for SPT64". Choose the correct sett... icrotime 100/200====
* Initialise the scanner. It is usually in COM ports 1-3 . If there is a Z... the "Init Z axis" box before you click on "Init. Scanner"
* Initialise the CAN device (controll
lly acquired with systems containing a fast Galvo scanner. In this tutorial, an image showing partially mov... luding the scale bar. If data are acquired with a scanner controlled by the SymPhoTime 64 software (i.e. the piezo scanner in the [[products:MicroTime#MicroTime 200|MicroTi... rrect. If the image is acquired using an external scanner, the image size has to be defined or transferred
fFCS) measurements.\\
If data are acquired with a scanner controlled by the SymPhoTime 64 software (i.e. the piezo scanner in the [[products:MicroTime#MicroTime 200|MicroTi... rrect. If the image is acquired using an external scanner, the image size has to be defined or transferred