tron multiplier that multiplies electrons, and an output terminal that outputs an electrical signal. But unlike PMTs which use multiple dynodes as electron
of 103 to 106 and produces a current pulse at the output. The timing jitter of MCPs is sufficiently sma... oton counting on a sub-nanosecond- scale, usually outperforming PMTs. Good but also expensive MCPs can
====
The asymptotic standard errors are a direct outcome of the Marquardt-Levenberg algorithm. They are readily available without any further calculations. On the other hand they
T3 Mode measurements always implicitly provide routing information if a router is used. Routing information is represented by four bits in each TTTR record, that allow up to four routing channels to be distinguished. However, these b
t record is generated that contains information about the channel it came from and the arrival time of ... the channel number and 28 bits for the time-tag. Routing is not supported. If the time tag overflows, a... records are queued in a [[FIFO]] (First In First Out) buffer capable of holding up to 256 k event reco... those lost in the [[dead time]] anyhow. The FIFO output is continuously read by the host PC, thereby m