time gating. However, as these decays contain the noise of the complete TCSPC-window, the end of the fitting curve might show noise fluctuations.
Setting a time gate removes the noise, and the fit curves usually become smoother.
5. Th
in and out of the volume will be smaller than the noise inherent to the fluorescence emission and at this... helees one should also like to get good signal-to-noise ratio so that acquisition times do not become ver
ters are overdetermined).
*The experimental noise follows a [[Gaussian distribution]].
*There... the model describes the data correctly.
*The experimental noise along the time axis is negligible.
since least squares assumes that the experimental noise follows a Gaussian distribution. Especially in [[... iven decay may be very small, so the experimental noise behaves more like a poisson distribution. For ana
regions only one or two photons caused dark count noise are detected which are randomly detected before t... parameters, as every variable parameter also adds noise to the fit. It depends on the sample, to which ex
no trends or big deviations in comparison to its noise level. This result shows that the image can be re... as they show no trends or waves at all, but only noise.
* Start fitting the image by pressing //Patter