Products:TimeHarp 260]]
In T2 Mode both signal inputs of the PicoHarp 300 are functionally identical. There is no dedication of input channel 0 to a [[SYNC]] signal. Usually both inputs are used to connect photon detectors. The events fro... le of holding up to 256 k event records. The FIFO input is fast enough to accept records at the full spee
ing monomers and covalently connected monomers as inputs and encoding specificity through designed hydrogen-bond networks allowed the construction of two-input or three-input gates based on competitive binding. \\ \\
* **31.03.20** FRET community has a new advi
400]] and [[products:TimeHarp 260]].
In T3 Mode input channel 0 is dedicated to a sync signal. As far a... le of holding up to 256 k event records. The FIFO input is fast enough to accept records at the full spee... . This total transfer rate is fully available for input channel 1. For all practically relevant fluoresce
: [[http://imagejdocu.tudor.lu/doku.php?id=plugin:inputoutput:picoquant_.pt3_image_reader:start]]
*... s Fluorescent multicolor images with minimal user input. Usefull for screening results during imaging and
apability of simultaneously recording both signal inputs (in interactive mode used as 'Start' and 'Stop')... is called [[T3-mode]]. In [[T2-mode]] both signal inputs are functionally identical.
Today recording of
ith a HydraHarp400, don't use use SYNC channel as input for one detector. Use e.g. input channels 1 and 2. The SYNC should stay connected.
Unfortunately, analy